Notox 'Bolt' Shortboard Surfboard

by: Notox Surfboards

Shaper: Benoit Ramex

The Bolt is one of the most versatile surfboards in the NOTOX range. Shorter and wider, this high performance shortboard was designed to boost your ability in small waves by providing you speed and manoeuvrability, all whilst keeping a serious amount of drive.

The combination of the flat rocker throughout with the short and wide outline and slightly rounded square tail is a recipe for success in those mellow British conditions.

Thanks to the naturally lightweight characteristics of the hemp fibreglass (about 40% lighter than traditional fibreglass), NOTOX boards have a tendency to float a little better. This means the boards tend to be designed slightly thinner (usually about 1/16 of an inch).

What you need to know:

  • 2"-4" shorter than your normal shortboard
  • Will handle up to 4-6ft
  • Thruster set up - FCS or Future
  • Length Width Thickness Volume
    5'6" 19" 2"1/8 24.3 L
    5'8" 19"1/4 2"1/4 27.0 L
    5'10" 19"1/2 2"3/8 29.0 L
    6'0" 19"3/4 2"1/2 30.5 L
    6'2" 20" 2"5/8 34.0 L
    • EPS Foam Blank with up to 100% recycled content and CFC Free guarantee
    • Quadric-axial Flax Fibre for increased flex and response
    • High performance Bio-Epoxy Resin 100% sourced in France
    • Vacuum Lamination process for a lighter, stronger and more dynamic board
    • All materials are sourced within 900km of the NOTOX factory (80% France, 20% Belgium)
    • 100% Built under the Charter of Quality (Health - Safety - Environment)
  • We believe in providing you with the board you need. For this reason, all boards will be made to order and will be delivered to you fresh within 4-6 weeks.





You might also be stoked on...